Print this page
Monday, 13 September 2010 17:50

Asus HS-1000W wireless headset impresses us in the lab Featured

Written by
Rate this item
(1 Vote)

Reading time is around minutes.



09-stuffHave you noticed that the selection for good quality audio components for the PC is dwindling? I mean the number of companies that make add-in sound cards, good quality analog (and digital) speaker sets and yes even head phones (for those of us that have to maintain a low volume presence). There was a time when the choices in audio gear was large enough that you had to do quite a bit of research to get something that fit right. Now, well the pickings are slim. However, just because they are limited does not mean there are not any good ones out there. As we recently found with the Cine5 from Asus some companies are getting back into the audio game. We had the chance to talk to Asus about their recent improvements in quality audio products (both on their boards and their own line of audio gear). Asus said they recognize that gamers, enthusiasts and HTPC owners are looking for better audio from their components; as such Asus is moving to provide these parts at all levels to meet this need. One of the products they have released is a set of plug and play wireless headphones; the Travelite HS-1000W. These headphones operate from a single USB audio dongle that acts as both audio processing device and charging connection. They are lightweight and while not exactly “stylish” still look pretty good. Now it is time for us to see if they work well or not.

The Box and Goodies -
The box that the HS-1000W ships in was less exciting that I have come to expect from Asus. It is very understated and clean box. At least it is on the surface, in keeping with the fact that this is still a computer component there is a flap that, once lifted, exposes you to the more common marketing images found.
02-box

04-box 05-box 06-box

According to the inside flap the major benefit of owning the HS-1000W is ease of use. Easy installation, ease portability, easy charging, easily adapt into your listening style (gaming, movies, etc.).
03-box 

Inside the box we find the HS-1000W already packed into their carrying case as well as a very simple manual. Asus has included the HS-1000W headset, the wireless audio dongle and a mini-USB to mini-USB cable that connects the two during charging. Pretty much everything you need to get started right away.

07-stuff 08-stuff

 



The HS-1000W Headset -
After pulling everything from the box and getting it all laid out we wanted to focus on the headset to find out how the HS-1000W head set looks on paper and how well it fits. The first thing I noticed about the headset is that it folds down relatively small. It is not as small as a pair of ear buds, but for a reall set of headphones with a full boom microphone they do get pretty small.
09-stuff
The headset is constructed predominantly of lightweight plastic (the whole headset only weighs 122 grams). There is a flat metal band that makes up the top of the head piece and allows for size adjustment. For comfort Asus has put a pad at the crown of the headset. This is capped on either end to prevent slipping. This pad at the top is also angled slightly for comfort and to ensure that the headphones are on properly.

11-phones 12-phones 13-mic


Moving from the crown of the headset to the ear pieces we have a lot to talk about. On the left earpiece is the boom microphone. This is supposed to be a high gain mic, but we could not find out any specs on it. In the properties of it we found some additional information it looks like both the output and input devices are from Avnera. Unless we are missing our guess the Micrpohone is using one of the VoiceMagic ASoC systems while the ear pieces are Avnera AudioMagic. In fact looking over the products page it looks like the entire product is an Avnera design. The Boom is capable of rotating 270 degrees and is made out of flexible material to allow you to bend it for the optimal position for voice quality.

Since we have already talked very briefly about the output portion of the HS-1000W let’s get into some additional detail. Each earpiece has a 40mm driver that has an astonishing 20Hz to 20KHz frequency response range. Now the range is not what is astonishing. This range is not uncommon and is what you would expect from a good set of headphones. What is impressive is that you are getting that over a 2.4GHz wireless connection. Again from what we are hearing about the AudioMagic technology from Avnera this is their niche. The T.H.D. (Total Harmonic Distortion) is around 0.08% again very impressive for a wireless device.  

All of the controls for the HS-1000W are located on the right ear piece. You have a link button (this lets you answer a Skype or other VoIP call) a power button and volume adjustment buttons (up and down). At the bottom of the earpiece we find the charging port and a reset button that is carefully hidden inside a pin hole.
10-charge
As the HS-1000W is wireless there has to be a battery to charge and to run the device. The one inside the HS-1000W is a Lithium Ion battery that is capable of up to 8 hours of usage and up to 3 months on stand-by; at least that is what is on paper. We will have to see how that turns out in the real world later on. You charge this with the included USB cable (charging takes about 2.5 hours) you can also charge the HS-1000W headset while using it.

Although the headset is nice it is nothing without the USB Dongle. This is a literal truth; the dongle contains the USB audio hardware from Avnera. These parts take control of audio processing as soon as they are connected to the PC (Windows will install the drivers in around 2 seconds) from there the audio output switches over to the Avnera device and the headphones begin to act as the output device for over a preset connection between the dongle and the headset. Now while this link is preset between the two devices you still need to link then at least once to get things going. Just push the button on the dongle and then the power button on the headset and you are good. The range max listed range between the two is about 50-65 feet (15-20 meters), again we will see how this holds up under real usage a little later.

Overall I am impressed with the build quality and how easy the HS-1000W is to setup and use. It really is as simple as Asus listed on the box; plug it in and go.



Performance -
Measuring audio performance is not an easy thing to do. You could spend thousands of dollars (and cost millions of lives… sorry minor Animal House moment) on quantitative audio sensing gear, but that would still not tell you how they will sound. It will just give you a measurement of the sound reproduction. For me I would rather hear someone’s opinion of the audio quality with some additional input from different listener types. A good descriptive paragraph detailing the feel of the sound is much better than just a series of numbers from a piece of test equipment. For our testing I will describe the feel of the audio as well as include ratings (one to five) and a single word description from at least five other people with different musical and audio tastes. We hope that this will give you the best idea of the audio quality of the audio gear under scrutiny.

The test system and comments -
system
The test system used this time is one that was put together for some 3D Gaming tests. It was built shortly after we finished up with our basic review of the H55N-USB3 from Gigabyte. We felt that the combination of hardware would give us a great platform for testing multiple audio types as well as adding in an extra (and unexpected test). Although we have always talked about audio as a compliment to the video you are viewing we noticed that when we turned on the 3D mode the quality of the audio became even more important. 3D Vision can make a game significantly more immersive (and others it makes hard to play and annoying) if your audio quality is weak it can seriously affect the immersion level of the game. We wanted to add this new test into the mix and see if the HS-1000W helps or hinders the immersion level of 3D Gaming.

Audio Quality -
In the box the HS-1000W has a listed frequency range of 20Hz to 20,000Hz (KHz) with a Total Harmonic Distortion level of .08%. This level of frequency response in a wireless audio device is pretty impressive, but can the HS-1000W really deliver this? We put it to the three usage models listed on the box (gaming, music/video, and VoIP chat) to find out. For our gaming tests (as we mentioned above) we used 3D Vision enabled games for a more immersive feel. The games used for this test were; Bioshock 2, Call of Duty 5 Wolrd at War, Batman Arkham Asylum.  For our video testing we played around with some HD YouTube videos, a DVD movie and finally a Bluray movie. Music was fairly easy to setup, we used music downloaded from Zune as well as CD audio. Our VoIP app of choice was Skype.

gaming movies

Skype 

As you can see our test group liked the audio from the HS-1000W. It was not the best they had heard but it was clearly very good. Gaming and movie performance was not as good as the Skype performance that was reported. Part of our group did tell us that the sound was odd in some way; they described it as a weird feeling of being in a closed in space. They still said the sound was good, but that it just sounded odd.

My Take -
For me I felt the audio was good, the range was excellent. The clarity in the mid-level frequencies was good with no mud. The highs and lows were excellent; there was none of the “tinny” sound that you get when a driver is pushing frequencies that are too high for it. The lows were clean and even at high volumes did not hurt the ears. There was a small problem though; even though the audio quality was good with clean separation it still sounded confined. Not like listening to something in a small room, but more like there was no space to the sound. This was probably due to the smaller size of the driver and the way the headphones position themselves on the ear. As you will read below they sit on the ear directly. This can have the effect of changing the shape of the ear canal and giving a muffled or close effect to sounds you hear. So while the audio is good, the pressure put on the ears themselves reduces the quality of the audio.

Battery Life -
The Battery life on the HS-1000W was not as advertised, but then again nothing ever is. The charring time was accurate though. It took a little under 2.5 hours to charge the HS-1000W from a dead battery to a full one. After that things got a little odd. The specs page on Asus’ website makes claims of 8 hours of listen time per battery charge. We did not see this time at all. Our average charge time was around 4-5 hours with a maximum of 5.5 hours. This was over a total of 10 runs from full charge to being unable to connect to the audio system. At the time of this writing I was not able to test the 30 day standby claim but I have a feeling it will also not be quite that long.


General -
The HS-1000W headset sits directly on the ears. This is fine for many people and worked well for me for the first hour or so. After that my ears started to hurt a little and the audio quality went down accordingly. This was because when you compress the outer ear for an extended period of time it can cause the ear canal to swell slightly this will give the audio coming in a muffled or tunnel effect. But again not everyone will suffer from this, about half of the people in the testing group said they were a little uncomfortable after 30 minutes, the other half did not note any discomfort. You results may vary.



Value -
At a $49.99 the HS-1000W is a great deal. It is priced well below what some lower quality wired headsets run. But with the HS-1000W you get not only the wireless headphones and microphone but an audio device that requires almost no interaction (with Windows Vista or Windows 7). We were hard pressed to find another product in the same range (even different versions of same core components) at the same price.

Conclusion -
Asus’ HS-1000W is a nice product. The plug and play aspect of the HS-1000W was amazing and is possibly the simplest audio product I have worked with. Even on a motherboard with no sound card installed you can drop this in and get running in about 3 seconds. The fact that the headset and USB dongle are already paired makes the connection even simpler. There is no mucking about with Bluetooth pairing or the loss of audio quality that happens with the Bluetooth stereo stack (on many products). Once you get past the three to four seconds it takes to get things up and running you will find that audio quality is also very good. Some people might experience a closed in sound due to the pressure of the HS-1000W headset pressing on their ears, but that is not everyone. The audio quality from the microphone is also good; we did not hear any complaints from the people on the other end of the Skype conversations. As far as travel goes the HS-1000W is a good choice, but I would have liked to see it get a little smaller. Even with it inside the included case it is still pretty big. One of the things that we wanted to do was to see if the HS-1000W could add to the immersion of 3D Gaming. Unfortunately for me at least it did not due to the closed in feeling to the audio. For others it did add to it with the HS-1000W’s full bass, clean signal separation and crisp high end. If you are looking for a wireless headset that is easy to use, inexpensive and has great audio quality then the HS-1000W is an excellent choice.

Read 24921 times Last modified on Monday, 13 September 2010 19:14
Sean Kalinich

Latest from Sean Kalinich

Related items

1 comment